K&G LASER TOOL SUITE

MAKE IT FIT - tabs and slots

Fix material-dependent tabs, slots, and open edge joints when the stock you are cutting is not the thickness the SVG was designed for.

TEST RELEASE 0.6Browser-localReview before applyRED CUT / BLUE SCORE preserved

Upload the SVGThe original file stays in your browser.

Enter both thicknessesUse actual caliper measurements.

Review the jointsApprove only real slots, tabs, and notches.

Download and test cutScrap material gets the final vote.

Make Your File Fit Test v0.6

Project File

+Drop an SVG here or click to browseLaser-ready SVG files only.

No file loaded.

Material Thickness

Designed thickness (in.)

What the original joints were drawn around.

Actual measured thickness (in.)

Measure the sheet with calipers.

How Should It Fit?

Slot clearance (in.)

Added to the finished opening.

Total kerf (in.)

K&G starting default: .010 in.

Apply kerf inside this tool
Turn this off when your laser software applies the offset later.

Detection Controls

Thickness tolerance (%)

How far geometry may differ from the designed thickness.

Minimum joint width (in.)

Helps ignore tiny decorations.

Look for square-corner edge tabs and open notches. Edge joints require approval.

Joint Review

0Closed Slots

0Edge Tabs

0Notches

Upload an SVG and detect the joints. Confident closed slots are selected automatically; edge joints wait for your approval.

Nothing has been changed yet.

Live Joint Preview

SelectedReview requiredNot selected

File—

Drawing Size—

Selected Changes0

Slot Target—

Cut a test joint first. Material thickness, paint, masking, humidity, focus, and kerf can all affect real-world fit. This test release is intentionally conservative and leaves curved or ambiguous geometry alone.